Wood Stud Wall Stucco Veneer
XPS CI with Flashing Tape as AWB and Sheathing
Overview
Overview
This Enclosure Solutions Wall System includes a wood stud structure with stucco veneer, XPS as CI, sheathing, and AWB with flashing tape, & fiberglass batt. By selecting correct components, it complies with NFPA 285(fire), ASTM E119(fire), ASTM E2357(air), & ASTM E331(water).
Get all the construction documentation you'll need, in a single click:
Specifications and Literature
Data Sheets (8)
Brochures (5)
Code Compliance (5)
Technical Documentation (9)
Warranty (2)
LEED (5)
Installation Instructions (1)
Safety Documents
Products In This Solution
Additional Products
Additional Products
Sold Separately
- Interior Gypsum Board
- Wood Studs
- Exterior Sheathing
- Air & Water Sealing Fasteners
- Lath Drainage Plane
- Lath Screws and Washers
- Stucco System
Performance Attributes
Durability
Easy Installation
Recycled Material
Thermal Comfort
ASHRAE 90.1
ASHRAE 90.1
ASHRAE Standard 90.1 requires Continuous insulation (CI) be used for all commercial and some residential buildings in the United States. Continuous insulation is defined in 90.1 as “insulation that is continuous across all structural members without thermal bridges other than fasteners and service openings. It is installed on the interior, exterior, or is integral to any opaque surface of the building envelope”.
NFPA 285 Compliant
NFPA 285 Compliant
NFPA 285 is required in the International Building Code (IBC) in multiple situations. The NFPA 285 test is to determine that combustibles, when exposed to fire on the exterior face of the wall, do not spread flame over the surface or through the core of the otherwise non-combustible wall assembly.
Contact Us
Contact Us
Even though we’re a global company, we’re always ready to answer your technical support questions regarding our products and solutions. Email to speak with our GETTECH team.