This is a cache of https://www.owenscorning.com/en-us/insulation/products/fiberglas-fabrication-board. It is a snapshot of the page as it appeared on 2026-02-02T05:00:27.905+0000.
Fiberglas™ Fabrication Board | Owens Corning Insulation
Owens Corning

Fiberglass Board Insulation for Mechanical Solutions

Industrial insulation that saves energy and reduces noise

The Owens Corning Fiberglas™ Fabrication Board Insulation is made of inorganic glass fibers with a thermosetting resin binder formed into rigid rectangular boards. The boards are used for the fabrication of insulation fittings, precision cut pipe, v-groove board, and pipe & tank wrap insulation. It conserves energy, maintains process temperatures, provides personnel protection, helps prevent condensation, and reduces noise emission and transmission. 

Download Data Sheet

Certifications

SCS Recycled Content - Average 53%

SCS Recycled Content - Average 53%

Technical Information

Physical Properties

Property

Test Method

Value

Added Density

ASTM C303

4.5 pcf (72 kg/m3)

Operating Temperature Range

ASTM C411

Board Thickness Direction

0 to 450 (-18 to 232 C)

Board Rotated 90 Degrees

0 to 850 F (-18 to 454 C)

Water Vapor Sorption

ASTM C1104

<5% by weight at 120 F (49 C)

95% R.H.

Fungi Resistance

ASTM C1338

Meets Requirements

Odor Emission

ASTM C1304

Meets Requirements

Linear Shrinkage

ASTM C356

Meets Requirements

Compressive Strength (Minimum)

at 10% deformation

at 25% deformation

ASTM C165

Board Thickness Direction

245 lb./ft2 (11.7 kPa)

575 lb./ft2 (27.5 kPa)

Board Rotated 90 Degrees

1,500 lb./ft2 (71.8 kPa)

N/A

Standards, Codes Compliance


• ASTM C612, Mineral Fiber Block and Board Thermal Insulation, Types IA, IB — Standard thickness direction

• ASTM C1393 Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tank Types I, II, IIIA, and IIIB — Rotated 90 Degrees

• ASTM C795, Thermal Insulation for Use Over Austenitic Stainless Steel1

• Nuclear Regulatory Commission Guide 1.36, Non-Metallic Thermal Insulation

• Does not contain the fire retardant decabrominated diphenyl ether (decaBDE)

• NFPA 90A and 90B

1.Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance. Certification needs to be specified at time of order.


Applications

  • Appliance and OEM
  • Flatwork
  • Pipe and Equipment
  • Pipe and Equipment > Equipment
  • Pipe and Equipment > Equipment > High Temp/Above Ambient Equipment
  • Pipe and Equipment > Equipment > Low Temp/Below Ambient Equipment
  • Pipe and Equipment > Equipment > Mechanical Equipment
  • Pipe and Equipment > Equipment > Mechanical Room
  • Pipe and Equipment > Equipment > Ovens, Boilers, and Furnaces
  • Pipe and Equipment > HVAC and Utility Piping
  • Pipe and Equipment > HVAC and Utility Piping > Air Ducts
  • Pipe and Equipment > HVAC and Utility Piping > Air Shafts
  • Pipe and Equipment > Process Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping > Ambient Piping (Freeze Protection)
  • Pipe and Equipment > Process Piping > Above Ground Piping > Commercial Piping and Ductwork
  • Pipe and Equipment > Process Piping > Above Ground Piping > Cyclical Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping > Heat Transfer Fluid Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping > High Temp/Above Ambient Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping > Load-Bearing Pipe Supports
  • Pipe and Equipment > Process Piping > Above Ground Piping > Low Temp/Below Ambient Piping
  • Pipe and Equipment > Process Piping > Above Ground Piping > Steam and Chilled Water Piping
  • Tanks
  • Tanks > Ambient and Above Ambient Tanks
  • Tanks > Ambient and Above Ambient Tanks > Fresh Water Tanks

Contact Us

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative.