Steel Stud Wall EIFS (PM, Hard Coat) Veneer
XPS CI with Liquid Flashing as AWB & Sheathing
Overview
Overview
This Enclosure Solutions Wall System includes a steel stud structure with EIFS (PM, Hard Coat) veneer, XPS as continuous insulation, air & weather barrier, and sheathing with liquid flashing, & fiberglass batt. By selecting correct components, it complies with ASTM E2357(air) & ASTM E331(water).
Specifications and Literature
Data Sheets (6)
Brochures (4)
Code Compliance (5)
Technical Documentation (9)
Warranty (2)
LEED (5)
Installation Instructions (1)
Safety Documents
Products In This Solution
FOAMULAR® 250 NGX® XPS insulation
FluidSealR® Liquid Flashing
PINK Next Gen® Fiberglas™ Batt insulation
Thermafiber® Safing insulation
Additional Products
Additional Products
Sold Separately
- Interior Gypsum Board
- Galvanized Steel Studs
- Air & Water Sealing Fasteners
- Lath Drainage Plane
- Lath Screws and Washers
- EIFS System
Performance Attributes
ASHRAE 90.1
ASHRAE 90.1
ASHRAE Standard 90.1 requires Continuous insulation (CI) be used for all commercial and some residential buildings in the United States. Continuous insulation is defined in 90.1 as “insulation that is continuous across all structural members without thermal bridges other than fasteners and service openings. It is installed on the interior, exterior, or is integral to any opaque surface of the building envelope”.
ASTM E330
ASTM E331
ASTM E2357
IWUIC Class 3
Drawings
Case Studies & Projects
Contact Us
Even though we're a global company, we're always ready to answer your questions. Call to speak with an Owens Corning representative.